Sales & Support: Request A Quote
Home ProductsActivated Carbon Dust Mask

FFP1 Activated Carbon Dust Mask Double Elastic Headband With 4 Plys

FFP1 Activated Carbon Dust Mask Double Elastic Headband With 4 Plys

FFP1 Activated Carbon Dust Mask Double Elastic Headband With 4 Plys

Product Details:

Place of Origin: China
Brand Name: Meixin
Certification: CE0086/CE0194
Model Number: MX-2006 FFP1V

Payment & Shipping Terms:

Minimum Order Quantity: 5000pcs,Negotiable
Price: Negotiable
Packaging Details: 12pcs/box,240pcs/ctn
Delivery Time: 30 days against artwork confirmed
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 50,000 pcs/ per Day
Contact Now
Detailed Product Description
Material: Non Woven Fabric Color: Gray
Valve: Yes Expiry Date: 5 Years
Classification: MX-2006 FFP1V Active Carbon: Yes
High Light:

activated carbon pollution mask

,

activated charcoal face mask

CE Approved FFP1 Valved Mask , Activated Carbon Dust Mask, Dust Particulate Respirator Mask

 

1 . Descriptions 

 

    MX-2006 FFP1V Cup Mask --Filters solid and liquid aerosols. Single-use.Conical shape. Adjustable nosepiece. Soft nose pad.Double elastic headband.With 4-plys, PP spunbond outer layer,actived carbon fiber filtration middle layer,PP meltbrown high filteration layer, PP spunbond inner layer.

    

2 . Certification

 

This product has been tested according to the following European Standard:

 

CE Standard for Disposable Respirators
EN: 149:2001 + A1:2009
Distinguish Filter Efficiency Penetration Resistant
FFP1 NR ≧80% < 20% < 21mmH2O
FFP2 NR ≧94% < 5% < 24mmH2O
FFP3 NR ≧99% < 1% < 30mmH2O
  •     EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
  •     EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

3 . WARNING

  • Before using any equipment for respiratory protection, users should be trained with regards to their proper use.The respirators without activated carbons can only be used to protect the user against particles and non-volatile liquids; they do not protect against gases/vapours.
  • The respirators equipped with activated carbons can be used to protect the user against particles and non-volatile liquids and also to block and relieve unpleasant odours (deriving from some exhalations) for concentrations lower than TLV (threshold limit value).Do not use these devices when the concentrations of the pollutant are not known or if concentrations are immediately dangerous to life or health.Do not use a respirator if you do not know exactly the type of toxic substances that may be present. In particular, never use the respirator in an explosive atmosphere or in the presence of explosive products.Do not alter, modify or repair the respirator.The mask adheres with more difficulty to the face of people with a beard or with a particular physiognomy. Adjust the mask to the face with extreme precision and attention to prevent unfiltered air passages from the mask.The mask in question does not provide oxygen and should therefore be used in an adequately ventilated environment. If the oxygen content in air is less than 19%, dizziness, breathing difficulties or light-headedness will be felt immediately. In the above case, go immediately to a more ventilated area to avoid more serious damage.
  • Disposable respirators marked with "NR" should not be used for more than one shift use and should be discarded after 8 hours of continuous use at most.
  • Reusable respirators are marked with "R" and can be used for more than one shift use.
  • Anyway both disposable and reusable respirators should be discarded and replaced if they are damaged or if the breathing resistance becomes excessive.

 

4 . FAQ

 

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.


Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.


Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.

 

5 . More pictures

 

 

 

FFP1 Activated Carbon Dust Mask Double Elastic Headband With 4 Plys

 

 

Contact Details
JINHUA MEIXIN PROTECTIVE EQUIPMENT FACTORY

Contact Person: Mrs. Sela.Jiang

Tel: 18357907868

Send your inquiry directly to us (0 / 3000)

Other Products